• Outposts rack
  • Hosts
  • Networking
  • Power
  • Security
  • Facility
  • Outposts rack
  • AWS Outposts are delivered as an industry-standard 42U rack. The Outpost rack is 80 inches (203.2cm) tall, 24 inches (60.96cm) wide, and 48 inches (121.92cm) deep. Inside we have hosts, switches, a network patch panel, a power shelf, and blank panels. Outposts are designed for high availability with redundant network switches and power connections. Customers can also provision their Outposts with additional capacity for additional resiliency.

    AWS delivers it to your preferred physical site fully assembled and ready to be rolled into final position. It is installed by AWS and the rack needs to be simply plugged into power and network.

    Run AWS Services locally on your Outposts

    Run same AWS APIs & tools as in the AWS Region

  • Hosts
  • Each Outposts rack comes pre-configured with a mix of EC2 instance capacity and EBS storage volumes that you choose from a pre-curated catalog of configurations.

    The hosts populating the Outpost rack are typically 1U or 2U and 21 inches wide.

    Supported EC2 instances include

    • General Purpose M5
    • Compute Intensive C5
    • Memory Intensive R5
    • Graphics Optimized G4
    • I/O Intensive i3en

    AWS Outposts catalog includes options supporting the latest generation Intel powered EC2 instance types with or without local instance storage.

    AWSserver-5014_Large
  • Networking
  • Seamlessly extend your existing Amazon VPC from an AWS Region to AWS Outposts in your on-premises location. Use the same VPC components that are accessible in the Region including internet gateways, virtual private gateways, Amazon VPC Transit Gateways, and VPC endpoints.

    Uplink speed Number of uplinks
    1 Gbps 1, 2, 3, 4, 5, 6, 7, 8
    10 Gbps 1, 2, 3, 4, 8, 12, 16
    40 Gbps 1, 2, 3, 4
    100 Gbps 1, 2, 3, 4

    After installation, you can create a subnet in your regional VPC and associate it with an Outpost just as you associate subnets with an Availability Zone in an AWS Region. Instances in Outpost subnets communicate with other instances in the AWS Region using private IP addresses, all within the same VPC.

    Network Switches

    Every Outpost rack has two physical network devices that attach to your local network. To connect to your local network you will need a minimum of two physical links between these Outpost network devices and your local network devices. AWS provides the optics that are compatible with the fiber that you provide at the rack position.

    Patch panels

    AWS Outposts supports the following uplink speeds and quantities for each Outpost network device.

    The uplink speed and quantity are symmetrical on each Outpost network device. If you use 100 Gbps as the uplink speed, you must configure the link with forward error correction (FEC CL91). Outpost racks can support single-mode fiber (SMF) with Lucent Connector (LC), multimode fiber (MMF), or MMF OM4 with LC.

    AWSserver-5048_Large
    download-1
  • Power
  • An AWS Outpost rack uses a centralized redundant power conversion unit and a DC distribution system in the backplane. This is handled with line mate connectors so you need to just snap the host into place to provide power. This improves reliability, cost, serviceability, and energy efficiency.

    AWSserver-5052
     Click to enlarge

    Redundant centralized power conversion unit

    The Outposts power shelf supports three power configurations. The configuration of the power shelf depends on how the host capacity is racked.

    AWSserver-5087
     Click to enlarge

    Power connectors

    5KVA-15KVA power supply and redundant feeds supported.

    AWSserver-5082
     Click to enlarge

    Bus bar

    A central power bus bar in the back to distribute power to each server. We have whips supporting a variety of common power types.

    The power shelf has two inputs, S1 and S2, that can be configured as follows.

      Redundant, single phase Redundant, three phase Single phase Three phase
    5 kVA 2 x L6-30P or IEC309, 1 drop to S1 and 1 drop to S2 2 x AH530P7W or AH532P6W, 1 drop to S1 and 1 drop to S2 1 x L6-30P or IEC309, 1 drop to S1 1 x AH530P7W or AH532P6W, 1 drop to S1
    10 kVA 4 x L6-30P or IEC309, 2 drops to S1 and 2 drops to S2   2 x L6-30P or IEC309, 2 drops to S1  
    15 kVA 6 x L6-30P or IEC309, 3 drops to S1 and 3 drops to S2   3 x L6-30P or IEC309, 3 drops to S1  
    AC line voltage Single phase 200 to 277 VAC (50 or 60 Hz) or three phase 346 to 480 VAC (50 to 60 Hz)
    Power consumption 5 kVA (4kW), 10 kVA (9 kW), or 15 kVA (13 kW)
    AC protection (upstream power breakers) 30 or 32 A
    AC inlet type (receptable) Single phase L6-30P (30A) or IEC309 P+N+E, 6 hour (32 A), three phase AH530P7W 3P+N+E, 7 hour (30A), or three phase AH532P6W 3P+N+E 6 hour (32 A)
    Whip length 10.25 ft (3 m)
    Whip - Rack cabling input From above or below
    AWSserver-5052_Large
    AWSserver-5087_Large
    AWSServer_Bus_Bar
  • Security
  • AWS is responsible for protecting Outposts’ infrastructure similar to how it secures infrastructure in the cloud today. Customers are responsible for securing their applications running on Outposts as they do in the Region today. 

    Additionally, customers are responsible for the physical security of their Outpost racks, and for ensuring consistent networking to the Outpost.

    Lockable door

    AWS Outposts comes with built-in tamper detection. It is an enclosed rack with a lockable door.

    Nitro Cards

    Every host on an Outposts has a Nitro Chip. The Nitro System enables the most secure cloud platform that continuously monitors, protects, and verifies the instance hardware and firmware. Virtualization resources are offloaded to dedicated hardware and software minimizing the attack surface. Finally, Nitro System's security model is locked down and prohibits all administrative access, including those of Amazon employees, eliminating the possibility of human error and tampering.

    Encryption key

    AWS ensures that all your data is protected and remains in your control. All data is encrypted at rest in the Nitro system that is present in every host. The encryption key is wrapped to an external key stored in a removable device. This removable device is present in every host on the Outpost. Destroying the device is equivalent to destroying the data.

    At the end of your Outposts term, when AWS removes the rack from the premises, you will also be required to destroy the device. This ensures your data won’t leave the premises.

    AWSserver-5021_Large
    AWSserver-4980_Small
  • Facility
  • AWS Outposts are delivered and installed by AWS technicians into a facility of your choice. 

    Casters and stands

    Outposts racks come in casters to easily roll the racks into the desired space in your facility. Stands are installed in-place.

    Facility requirements

    • Temperature and humidity – An Outpost rack is front-to-back cold aisle, hot aisle. The ambient temperature must be between 41º F (5º C) and 104º F (40º C). The relative humidity must be between 8 percent and 80 percent with no condensation.
    • Airflow – The rack position must provide at least 145.8 times the kVA of cubic feet per minute (CFM) airflow.
    • Loading dock – Your loading dock must accommodate a rack crate that is 94 inches (239 cm) high by 54 inches (138 cm) wide by 51 inches (130 cm) deep.
    • Weight support – The location where the rack will be installed and the path to that location must support the weight specified in the order summary at the rack point loads. This includes freight and standard elevators.
    • Clearance – The equipment is 80 inches (203 cm) high by 24 inches (61 cm) wide by 48 inches (122 cm) deep. Any doorways, hallways, turns, ramps, and elevators must provide sufficient clearance. At the final resting position, there must be a 24 inch (61 cm) wide by 48 inch (122 cm) deep area for the Outpost, with an additional 48 inches (122 cm) of front clearance and 24 inches (61 cm) of rear clearance. The total minimum area required for the Outpost is 24 inch (61 cm) wide by 10 feet (305 cm) deep.

    The following diagram shows the total minimum area required for the Outpost, including clearance.

    Outposts Casters
     Click to enlarge
    • Seismic bracing – To the extent required by regulation or code, you will install and maintain appropriate seismic anchorage and bracing for the rack while it is in your facility.
    • Bonding point – We recommend that you provide a bonding wire / point at the rack position so that the AWS-certified technician can bond the racks during installation.
    • You will not change the facility in a way that negatively affects the ability of AWS to access, service, or remove the Outpost.
    • Elevation – The elevation of the room where the rack is installed must be below 10,005 feet (3,050 meters).
    AWSserver-4976
    outpost-area
Read the AWS Outposts FAQs
Contact us

Learn more about AWS Outposts by contacting us directly

Contact us 
Sign up for a free AWS account
Sign up for a free account

Instantly get access to the AWS Free Tier. 

Sign up 
Start building with AWS Outposts
Start building in the console

Get started with AWS Outposts in the AWS Management Console.

Sign in