AWS Security Blog

SaaS access control using Amazon Verified Permissions with a per-tenant policy store

Access control is essential for multi-tenant software as a service (SaaS) applications. SaaS developers must manage permissions, fine-grained authorization, and isolation.

In this post, we demonstrate how you can use Amazon Verified Permissions for access control in a multi-tenant document management SaaS application using a per-tenant policy store approach. We also describe how to enforce the tenant boundary.

We usually see the following access control needs in multi-tenant SaaS applications:

  • Application developers need to define policies that apply across all tenants.
  • Tenant users need to control who can access their resources.
  • Tenant admins need to manage all resources for a tenant.

Additionally, independent software vendors (ISVs) implement tenant isolation to prevent one tenant from accessing the resources of another tenant. Enforcing tenant boundaries is imperative for SaaS businesses and is one of the foundational topics for SaaS providers.

Verified Permissions is a scalable, fine-grained permissions management and authorization service that helps you build and modernize applications without having to implement authorization logic within the code of your application.

Verified Permissions uses the Cedar language to define policies. A Cedar policy is a statement that declares which principals are explicitly permitted, or explicitly forbidden, to perform an action on a resource. The collection of policies defines the authorization rules for your application. Verified Permissions stores the policies in a policy store. A policy store is a container for policies and templates. You can learn more about Cedar policies from the Using Open Source Cedar to Write and Enforce Custom Authorization Policies blog post.

Before Verified Permissions, you had to implement authorization logic within the code of your application. Now, we’ll show you how Verified Permissions helps remove this undifferentiated heavy lifting in an example application.

Multi-tenant document management SaaS application

The application allows to add, share, access and manage documents. It requires the following access controls:

  • Application developers who can define policies that apply across all tenants.
  • Tenant users who can control who can access their documents.
  • Tenant admins who can manage all documents for a tenant.

Let’s start by describing the application architecture and then dive deeper into the design details.

Application architecture overview

There are two approaches to multi-tenant design in Verified Permissions: a single shared policy store and a per-tenant policy store. You can learn about the considerations, trade-offs and guidance for these approaches in the Verified Permissions user guide.

For the example document management SaaS application, we decided to use the per-tenant policy store approach for the following reasons:

  • Low-effort tenant policies isolation
  • The ability to customize templates and schema per tenant
  • Low-effort tenant off-boarding
  • Per-tenant policy store resource quotas

We decided to accept the following trade-offs:

  • High effort to implement global policies management (because the application use case doesn’t require frequent changes to these policies)
  • Medium effort to implement the authorization flow (because we decided that in this context, the above reasons outweigh implementing a mapping from tenant ID to policy store ID)

Figure 1 shows the document management SaaS application architecture. For simplicity, we omitted the frontend and focused on the backend.

Figure 1: Document management SaaS application architecture

Figure 1: Document management SaaS application architecture

  1. A tenant user signs in to an identity provider such as Amazon Cognito. They get a JSON Web Token (JWT), which they use for API requests. The JWT contains claims such as the user_id, which identifies the tenant user, and the tenant_id, which defines which tenant the user belongs to.
  2. The tenant user makes API requests with the JWT to the application.
  3. Amazon API Gateway verifies the validity of the JWT with the identity provider.
  4. If the JWT is valid, API Gateway forwards the request to the compute provider, in this case an AWS Lambda function, for it to run the business logic.
  5. The Lambda function assumes an AWS Identity and Access Management (IAM) role with an IAM policy that allows access to the Amazon DynamoDB table that provides tenant-to-policy-store mapping. The IAM policy scopes down access such that the Lambda function can only access data for the current tenant_id.
  6. The Lambda function looks up the Verified Permissions policy_store_id for the current request. To do this, it extracts the tenant_id from the JWT. The function then retrieves the policy_store_id from the tenant-to-policy-store mapping table.
  7. The Lambda function assumes another IAM role with an IAM policy that allows access to the Verified Permissions policy store, the document metadata table, and the document store. The IAM policy uses tenant_id and policy_store_id to scope down access.
  8. The Lambda function gets or stores documents metadata in a DynamoDB table. The function uses the metadata for Verified Permissions authorization requests.
  9. Using the information from steps 5 and 6, the Lambda function calls Verified Permissions to make an authorization decision or create Cedar policies.
  10. If authorized, the application can then access or store a document.

Application architecture deep dive

Now that you know the architecture for the use cases, let’s review them in more detail and work backwards from the user experience to the related part of the application architecture. The architecture focuses on permissions management. Accessing and storing the actual document is out of scope.

Define policies that apply across all tenants

The application developer must define global policies that include a basic set of access permissions for all tenants. We use Cedar policies to implement these permissions.

Because we’re using a per-tenant policy store approach, the tenant onboarding process should create these policies for each new tenant. Currently, to update policies, the deployment pipeline should apply changes to all policy stores.

The “Add a document” and “Manage all the documents for a tenant” sections that follow include examples of global policies.

Make sure that a tenant can’t edit the policies of another tenant

The application uses IAM to isolate the resources of one tenant from another. Because we’re using a per-tenant policy store approach we can use IAM to isolate one tenant policy store from another.

Architecture

Figure 2: Tenant isolation

Figure 2: Tenant isolation

  1. A tenant user calls an API endpoint using a valid JWT.
  2. The Lambda function uses AWS Security Token Service (AWS STS) to assume an IAM role with an IAM policy that allows access to the tenant-to-policy-store mapping DynamoDB table. The IAM policy only allows access to the table and the entries that belong to the requesting tenant. When the function assumes the role, it uses tenant_id to scope access to the items whose partition key matches the tenant_id. See the How to implement SaaS tenant isolation with ABAC and AWS IAM blog post for examples of such policies.
  3. The Lambda function uses the user’s tenant_id to get the Verified Permissions policy_store_id.
  4. The Lambda function uses the same mechanism as in step 2 to assume a different IAM role using tenant_id and policy_store_id which only allows access to the tenant policy store.
  5. The Lambda function accesses the tenant policy store.

Add a document

When a user first accesses the application, they don’t own any documents. To add a document, the frontend calls the POST /documents endpoint and supplies a document_name in the request’s body.

Cedar policy

We need a global policy that allows every tenant user to add a new document. The tenant onboarding process creates this policy in the tenant’s policy store.

permit (    
  principal,
  action == DocumentsAPI::Action::"addDocument",
  resource
);

This policy allows any principal to add a document. Because we’re using a per-tenant policy store approach, there’s no need to scope the principal to a tenant.

Architecture

Figure 3: Adding a document

Figure 3: Adding a document

  1. A tenant user calls the POST /documents endpoint to add a document.
  2. The Lambda function uses the user’s tenant_id to get the Verified Permissions policy_store_id.
  3. The Lambda function calls the Verified Permissions policy store to check if the tenant user is authorized to add a document.
  4. After successful authorization, the Lambda function adds a new document to the documents metadata database and uploads the document to the documents storage.

The database structure is described in the following table:

tenant_id (Partition key): String document_id (Sort key): String document_name: String document_owner: String
<TENANT_ID> <DOCUMENT_ID> <DOCUMENT_NAME> <USER_ID>
  • tenant_id: The tenant_id from the JWT claims.
  • document_id: A random identifier for the document, created by the application.
  • document_name: The name of the document supplied with the API request.
  • document_owner: The user who created the document. The value is the user_id from the JWT claims.

Share a document with another user of a tenant

After a tenant user has created one or more documents, they might want to share them with other users of the same tenant. To share a document, the frontend calls the POST /shares endpoint and provides the document_id of the document the user wants to share and the user_id of the receiving user.

Cedar policy

We need a global document owner policy that allows the document owner to manage the document, including sharing. The tenant onboarding process creates this policy in the tenant’s policy store.

permit (    
  principal,
  action,
  resource
) when {
  resource.owner == principal && 
  resource.type == "document"
};

The policy allows principals to perform actions on available resources (the document) when the principal is the document owner. This policy allows the shareDocument action, which we describe next, to share a document.

We also need a share policy that allows the receiving user to access the document. The application creates these policies for each successful share action. We recommend that you use policy templates to define the share policy. Policy templates allow a policy to be defined once and then attached to multiple principals and resources. Policies that use a policy template are called template-linked policies. Updates to the policy template are reflected across the principals and resources that use the template. The tenant onboarding process creates the share policy template in the tenant’s policy store.

We define the share policy template as follows:

permit (    
  principal == ?principal,  
  action == DocumentsAPI::Action::"accessDocument",
  resource == ?resource 
);

The following is an example of a template-linked policy using the share policy template:

permit (    
  principal == DocumentsAPI::User::"<user_id>",
  action == DocumentsAPI::Action::"accessDocument",
  resource == DocumentsAPI::Document::"<document_id>" 
);

The policy includes the user_id of the receiving user (principal) and the document_id of the document (resource).

Architecture

Figure 4: Sharing a document

Figure 4: Sharing a document

  1. A tenant user calls the POST /shares endpoint to share a document.
  2. The Lambda function uses the user’s tenant_id to get the Verified Permissions policy_store_id and policy template IDs for each action from the DynamoDB table that stores the tenant to policy store mapping. In this case the function needs to use the share_policy_template_id.
  3. The function queries the documents metadata DynamoDB table to retrieve the document_owner attribute for the document the user wants to share.
  4. The Lambda function calls Verified Permissions to check if the user is authorized to share the document. The request context uses the user_id from the JWT claims as the principal, shareDocument as the action, and the document_id as the resource. The document entity includes the document_owner attribute, which came from the documents metadata DynamoDB table.
  5. If the user is authorized to share the resource, the function creates a new template-linked share policy in the tenant’s policy store. This policy includes the user_id of the receiving user as the principal and the document_id as the resource.

Access a shared document

After a document has been shared, the receiving user wants to access the document. To access the document, the frontend calls the GET /documents endpoint and provides the document_id of the document the user wants to access.

Cedar policy

As shown in the previous section, during the sharing process, the application creates a template-linked share policy that allows the receiving user to access the document. Verified Permissions evaluates this policy when the user tries to access the document.

Architecture

Figure 5: Accessing a shared document

Figure 5: Accessing a shared document

  1. A tenant user calls the GET /documents endpoint to access the document.
  2. The Lambda function uses the user’s tenant_id to get the Verified Permissions policy_store_id.
  3. The Lambda function calls Verified Permissions to check if the user is authorized to access the document. The request context uses the user_id from the JWT claims as the principal, accessDocument as the action, and the document_id as the resource.

Manage all the documents for a tenant

When a customer signs up for a SaaS application, the application creates the tenant admin user. The tenant admin must have permissions to perform all actions on all documents for the tenant.

Cedar policy

We need a global policy that allows tenant admins to manage all documents. The tenant onboarding process creates this policy in the tenant’s policy store.

permit (    
  principal in DocumentsAPI::Group::"<admin_group_id>”,
  action,
  resource
);

This policy allows every member of the <admin_group_id> group to perform any action on any document.

Architecture

Figure 6: Managing documents

Figure 6: Managing documents

  1. A tenant admin calls the POST /documents endpoint to manage a document. 
  2. The Lambda function uses the user’s tenant_id to get the Verified Permissions policy_store_id.
  3. The Lambda function calls Verified Permissions to check if the user is authorized to manage the document.

Conclusion

In this blog post, we showed you how Amazon Verified Permissions helps to implement fine-grained authorization decisions in a multi-tenant SaaS application. You saw how to apply the per-tenant policy store approach to the application architecture. See the Verified Permissions user guide for how to choose between using a per-tenant policy store or one shared policy store. To learn more, visit the Amazon Verified Permissions documentation and workshop.

If you have feedback about this post, submit comments in the Comments section below. If you have questions about this post, start a new thread on the Amazon Verified Permissions re:Post or contact AWS Support.

Manuel Heinkel

Manuel Heinkel

Manuel is a Solutions Architect at AWS, working with software companies in Germany to build innovative and secure applications in the cloud. He supports customers in solving business challenges and achieving success with AWS. Manuel has a track record of diving deep into security and SaaS topics. Outside of work, he enjoys spending time with his family and exploring the mountains.

Alex Pulver

Alex Pulver

Alex is a Principal Solutions Architect at AWS. He works with customers to help design processes and solutions for their business needs. His current areas of interest are product engineering, developer experience, and platform strategy. He’s the creator of Application Design Framework, which aims to align business and technology, reduce rework, and enable evolutionary architecture.