End-to-end system of wireless sensors and gateways

Amazon Monitron’s wireless sensors can easily attach to your equipment with adhesive, without the need for expensive and cumbersome cabling. These low-cost sensors (including Ex-rated sensors) are purpose-built to capture vibration and temperature data in order to monitor the condition of your rotating equipment. Amazon Monitron also includes Wi-Fi and ethernet gateways to transfer the sensor data to AWS. Amazon Monitron Sensors and Gateways are pre-configured to work with the Amazon Monitron service.


Technical specs

Amazon Monitron Sensors (TE1A001)

Dimensions 52.8 x 43.0 x 24.9 mm / 2.08 x 1.69 x 0.98 inch
Weight 54 grams
IP Rating IP69
Connectivity Wireless protocol: Bluetooth Low Energy 5
Power Lithium Metal Non-Rechargeable Batteries. Estimated 5 year battery life
Learn more »

Ex-rated Amazon Monitron Sensors (TE1A195)

Operating Temperature -20°C to +80°C / -4°F to +176°F
Dimensions 52.8 x 43.0 x 24.9 mm / 2.08 x 1.69 x 0.98 inch
Weight 55 grams
IP Rating IP69
Ex Ratings

US & Canada: Class I, Zone 2, AEx ic IIC T4 Gc “I.S.”

Ex ic IIC T4 Gc

Class I, Division 2, Groups A, B, C and D, T4

EU, UK & IECEx: II 3G Ex ic IIC T4 Gc

Ambient Temperature Rating: -40°C to +80°C

Ex Compliance


UL/CSA 62368-1

UL/CSA 60079-0

UL/CSA 60079-11

IEC/EN 60079-0

IEC/EN 60079-11

Mounting method Instant adhesive / Epoxy
Wireless protocol Bluetooth Low Energy 5
Vibration sensor

3-axis MEMS accelerometer, range +/-16g, frequency

response up to 1KHz, output data rate 6.6KHz

Power Lithium Metal Non-Rechargeable Batteries
Battery life Estimated 5 years
Default data capture frequency wake-up on motion/ once an hour

Amazon Monitron Gateway (Wi-Fi)

Dimensions 90 x 78 x 38 mm / 3.6 x 3.1 x 1.5 inch
Weight 95 grams
IP Rating IP65
Connectivity WiFi, 802.11b/g/n, ISM 2.4GHz only
Power Power 5.0V - 2.0A DC, AC adapter included for some countries (indoors only)

Amazon Monitron Gateway (Ethernet)

Operating Temperature -20 + 60°C / -4 +140°F
Dimensions 13.9 x 10.7 x 4.1 cm, 5.5 x 4.2 x 1.6 inch
Weight 230 gr, 8.2 oz
IP Rating IIP65
Connectivity RJ45 10 / 100Mbps
Power IEEE 802.3 at type 1 (15.4 Watt Class)
Learn more »

Simple device set-up with the Amazon Monitron Mobile App

Set up Amazon Monitron sensors quickly and easily by tapping your phone on the sensor utilizing near-field communication (NFC) technology. Set up your Gateway by following a few simple steps in the app. You can quickly install and start using these devices to monitor your equipment without any development work.

Searching for gateway
Pair sensor with NFC

ISO and ML-based analytics

Amazon Monitron automatically detects abnormal machine operating states by analyzing vibration and temperature signals using the ISO 20816 standards for vibration, and ML-enabled models. 

ISO and ML based analytics

Timely notifications in the Amazon Monitron app

Amazon Monitron sends push notifications when the service detects abnormal machine patterns from the vibration and temperature settings. You can also review and track these abnormal machine states within the app.

Timely notifications in the Monitron app

Alert feedback

With just a few taps in the mobile and web apps, you can enter feedback on the alerts received, such as failure mode, failure cause, and action taken. Amazon Monitron learns from that feedback and continually improves over time.

Add ML feedback in the app