AWS Compute Blog

Designing durable serverless apps with DLQs for Amazon SNS, Amazon SQS, AWS Lambda

This post is courtesy of Otavio Ferreira, Sr Manager, SNS.

In a postal system, a dead-letter office is a facility for processing undeliverable mail. In pub/sub messaging, a dead-letter queue (DLQ) is a queue to which messages published to a topic can be sent, in case those messages cannot be delivered to a subscribed endpoint.

Amazon SNS supports DLQs, making your applications more resilient and durable upon delivery failure modes.

Understanding message delivery failures and retries

The delivery of a message fails when it’s not possible for Amazon SNS to access the subscribed endpoint. There are two reasons why this might happen:

  • Client errors, where the client is SNS (the message sender).
  • Server errors, where the server is the system that hosts the subscription endpoint (the message receiver), such as Amazon SQS or AWS Lambda.

Client errors

Client errors happen when SNS has stale subscription metadata. One common cause of client errors is when you (the endpoint owner) delete the endpoint. For example, you might delete the SQS queue that is subscribed to your SNS topic, without also deleting the SNS subscription corresponding to the queue. Another common cause is when you change the resource policy attached to your endpoint in a way that prevents SNS from delivering messages to that endpoint.

These errors are considered client errors because the client has attempted the delivery of a message to a destination that, from the client’s perspective, is no longer accessible. SNS does not retry the delivery of messages that failed as the result of client errors.

Server errors

Server errors happen when the system that powers the subscribed endpoint is unavailable, or when it returns an exception response indicating that it failed to process a valid request from SNS.

When server errors occur, SNS retries the failed deliveries according to a backoff function, which can be either linear or exponential. When a server error occurs for an AWS managed endpoint, backed by either SQS or Lambda, then SNS retries the delivery for up to 100,015 times, over 23 days.

Server errors can also happen with customer managed endpoints, namely HTTP, SMS, email, and mobile push endpoints. SNS also retries the delivery for these types of endpoints. HTTP endpoints support customer-defined retry policies, while SNS sets an internal delivery retry policy for SMS, email, and mobile push endpoints to 50 times, over 6 hours.

Delivery retries

SNS may receive a client error, or continue to receive a server error for a message beyond the number of retries defined by the corresponding retry policy. In that event, SNS discards the message. Setting a DLQ to your SNS subscription enables you to keep this message, regardless of the type of error, either client or server. DLQs give you more control over messages that cannot be delivered.

For more information on the delivery retry policy for each delivery protocol supported by SNS, see Amazon SNS Message Delivery Retry.

Using DLQs for AWS services

SNS, SQS, and Lambda support DLQs, addressing different failure modes. All DLQs are regular queues powered by SQS.

In SNS, DLQs store the messages that failed to be delivered to subscribed endpoints. For more information, see Amazon SNS Dead-Letter Queues.

In SQS, DLQs store the messages that failed to be processed by your consumer application. This failure mode can happen when producers and consumers fail to interpret aspects of the protocol that they use to communicate. In that case, the consumer receives the message from the queue, but fails to process it, as the message doesn’t have the structure or content that the consumer expects. The consumer can’t delete the message from the queue either. After exhausting the receive count in the redrive policy, SQS can sideline the message to the DLQ. For more information, see Amazon SQS Dead-Letter Queues.

In Lambda, DLQs store the messages that resulted in failed asynchronous executions of your Lambda function. An execution can result in an error for several reasons. Your code might raise an exception, time out, or run out of memory. The runtime executing your code might encounter an error and stop. Your function might hit its concurrency limit and be throttled. Regardless of the error type, when the error occurs, your code might have run completely, partially, or not at all. By default, Lambda retries an asynchronous execution twice. After exhausting the retries, Lambda can sideline the message to the DLQ. For more information, see AWS Lambda Dead-Letter Queues.

When you have a fan-out architecture, with SQS queues and Lambda functions subscribed to an SNS topic, we recommend that you set DLQs to your SNS subscriptions, and to your destination queues and functions as well. This approach gives your application resilience against message delivery failures, message processing failures, and function execution failures too.

Applying DLQs in a use case

Here’s how everything comes together. The following diagram shows a serverless backend architecture that supports a car rental application. This is a durable serverless architecture based on DLQs for SNS, SQS, and Lambda.

Dead Letter Queue - DLQ SNS use case with architecture diagram

When a customer places an order to rent a car, the application sends that request to an API, which is powered by Amazon API Gateway. The REST API is backed by an SNS topic named Rental-Orders, and deployed onto an Amazon VPC subnet. The topic then fans out that order to the following two subscribed endpoints, for parallel processing:

  • An SQS queue, named Rental-Fulfilment, which feeds the integration with an internal fulfilment system hosted on Amazon EC2.
  • A Lambda function, named Rental-Billing, which processes and loads the customer order into a third-party billing system, also hosted on Amazon EC2.

To increase the durability of this serverless backend API, the following DLQs have been set up:

  • Two SNS DLQs, namely Rental-Fulfilment-Fanout-DLQ and Rental-Billing-Fanout-DLQ, which store the order in case either the subscribed SQS queue or Lambda function ever becomes unreachable.
  • An SQS DLQ, named Rental-Fulfilment-DLQ, which stores the order when the fulfilment system fails to process the order.
  • A Lambda DLQ, named Rental-Billing-DLQ, which stores the order when the function fails to process and load the order into the billing system.

When the DLQ captures the message, you can inspect the message for troubleshooting purposes. After you address the error at hand, you can poll the DLQ to retry the processing of the message.

Setting up DLQs for subscriptions, queues, and functions can be done using the AWS Management Console, SDK, CLI, API, or AWS CloudFormation. You can use the SDK, CLI, and API for polling the DLQs as well.

Configuring DLQs for subscriptions

You can attach a DLQ to an SNS subscription by setting the subscription’s RedrivePolicy parameter. The policy is a JSON object that refers to the DLQ ARN. The ARN must point to an SQS queue in the same AWS account as that of the SNS subscription. Also, both the DLQ and the subscription must be in the same AWS Region.

Here’s how you can configure one of the SNS DLQs applied in the car rental application example, presented earlier.

The following JSON object is a CloudFormation template that subscribes the SQS queue Rental-Fulfilment to the SNS topic Rental-Orders. The template also sets a RedrivePolicy that targets Rental-Fulfilment-Fanout-DLQ as a DLQ.

Lastly, the template sets a FilterPolicy value. It makes SNS deliver a message to the subscribed queue only if the published message carries an attribute named order-status with value set to either confirmed or canceled. As Amazon SNS Message Filtering happens before message delivery, messages that are filtered out aren’t sent to that subscription’s DLQ.

Internally, the CloudFormation template uses the SNS Subscribe API action for deploying the subscription and setting both policies, all part of the same API request.

   "Resources": {
      "mySubscription": {
         "Type" : "AWS::SNS::Subscription",
         "Properties" : {
            "Protocol": "sqs",
            "Endpoint": "arn:aws:sqs:us-east-1:123456789012:Rental-Fulfilment",
            "TopicArn": "arn:aws:sns:us-east-1:123456789012:Rental-Orders",
            "RedrivePolicy": {
            "FilterPolicy": { 
               "order-status": [ "confirmed", "canceled" ]

Maybe the SNS topic and subscription are already deployed. In that case, you can use the SNS SetSubscriptionAttributes API action to set the RedrivePolicy, as shown by the following code examples, based on the AWS CLI and the AWS SDK for Java.

$ aws sns set-subscription-attributes 
   --region us-east-1
   --subscription-arn arn:aws:sns:us-east-1:123456789012:Rental-Orders:44019880-ffa0-4067-9cb4-b974443bcck2
   --attribute-name RedrivePolicy 
   --attribute-value '{"deadLetterTargetArn":"arn:aws:sqs:us-east-1:123456789012:Rental-Fulfilment-Fanout-DLQ"}'
AmazonSNS sns = AmazonSNSClientBuilder.defaultClient();

String subscriptionArn = "arn:aws:sns:us-east-1:123456789012:Rental-Orders:44019880-ffa0-4067-9cb4-b974443bcck2";

String redrivePolicy = "{\"deadLetterTargetArn\":\"arn:aws:sqs:us-east-1:123456789012:Rental-Fulfilment-Fanout-DLQ\"}";

SetSubscriptionAttributesRequest request = new SetSubscriptionAttributesRequest(


Monitoring DLQs

You can use Amazon CloudWatch metrics and alarms to monitor the DLQs associated with your SNS subscriptions. In the car rental example, you can monitor the DLQs to be notified when the API failed to distribute any car rental order to the fulfillment or billing systems.

As regular SQS queues, the DLQs in SNS emit a number of metrics to CloudWatch, in 5-minute data points, such as NumberOfMessagesSent, NumberOfMessagesReceived and NumberOfMessagesDeleted. You can use these SQS metrics to be notified upon activity in your DLQs in SNS, so you may trigger a message recovery protocol.

You might have a case where you expect the DLQ to be always empty. In that case, create an CloudWatch alarm on NumberOfMessagesSent, set the alarm threshold to zero, and provide a separate SNS topic to be notified when the alarm goes off. The SNS topic, in its turn, can delivery your alarm notification to any endpoint type that you choose, such as email address, phone number, or mobile pager app.

Additionally, SNS itself provides its own set of metrics that are relevant to DLQs. Specifically, SNS metrics include the following:

  • NumberOfNotificationsRedrivenToDlq – Used when sending the message to the DLQ succeeds.
  • NumberOfNotificationsFailedToRedriveToDlq – Used when sending the message to the DLQ fails. This can happen because the DLQ either doesn’t exist anymore or doesn’t have the required access permissions to allow SNS to send messages to it. For more information about setting up the required access policy, see Giving Permissions for Amazon SNS to Send Messages to Amazon SQS.

Debugging with DLQs

Use CloudWatch Logs to see the exceptions that caused your SNS deliveries to fail and your messages to be sidelined to DLQs. In the car rental example, you can inspect the rental orders in the DLQs, as well as the logs associated with these queues. Then you can understand why those orders failed to be fanned out to the fulfilment or billing systems.

SNS can log both successful and failed deliveries in CloudWatch. You can enable Amazon SNS Delivery Status Logging by setting three SNS topic attributes, which are delivery protocol-specific. As an example, for SNS deliveries to SQS queues, you must set the following topic attributes: SQSSuccessFeedbackRoleArn,  SQSFailureFeedbackRoleArn, and SQSSuccessFeedbackSampleRate.

The following JSON object represents a successful SNS delivery in an CloudWatch Logs entry. The status code logged is 200 (SUCCESS). The attribute RedrivePolicy shows that the SNS subscription in question had its DLQ set.

  "notification": {
    "messageMD5Sum": "7bb3327ac55e49485bad42e159ca4d4b",
    "messageId": "e8c2bb09-235c-5f5d-b583-efd8df0f7d74",
    "topicArn": "arn:aws:sns:us-east-1:123456789012:Rental-Orders",
    "timestamp": "2019-10-04 05:13:55.876"
  "delivery": {
    "deliveryId": "6adf232e-fb12-5062-a564-27ff3741051f",
    "redrivePolicy": "{\"deadLetterTargetArn\": \"arn:aws:sqs:us-east-1:123456789012:Rental-Fulfilment-Fanout-DLQ\"}",
    "destination": "arn:aws:sqs:us-east-1:123456789012:Rental-Fulfilment",
    "providerResponse": "{\"sqsRequestId\":\"b2608a46-ccc4-51cc-003d-de972097debc\",\"sqsMessageId\":\"05fecd22-60a1-4d7d-bb79-026d49700b5a\"}",
    "dwellTimeMs": 58,
    "attempts": 1,
    "statusCode": 200
  "status": "SUCCESS"

The following JSON object represents a failed SNS delivery in CloudWatch Logs. In the following code example, the subscribed queue doesn’t exist. As a client error, the status code logged is 400 (FAILURE). Again, the RedrivePolicy attribute refers to a DLQ.

  "notification": {
    "messageMD5Sum": "81c395cbd350da6bedfe3b24db9517b0",
    "messageId": "9959db9d-25c8-57a6-9439-8e5be8f71a1f",
    "topicArn": "arn:aws:sns:us-east-1:123456789012:Rental-Orders",
    "timestamp": "2019-10-04 05:16:51.116"
  "delivery": {
    "deliveryId": "be743821-4c2c-5acc-a586-6cf0807f6fb1",
    "redrivePolicy": "{\"deadLetterTargetArn\": \"arn:aws:sqs:us-east-1:123456789012:Rental-Fulfilment-Fanout-DLQ\"}",
    "destination": "arn:aws:sqs:us-east-1:123456789012:Rental-Fulfilment",
    "providerResponse": "{\"ErrorCode\":\"AWS.SimpleQueueService.NonExistentQueue\", \"ErrorMessage\":\"The specified queue does not exist or you do not have access to it.\",\"sqsRequestId\":\"Unrecoverable\"}",
    "dwellTimeMs": 53,
    "attempts": 1,
    "statusCode": 400
  "status": "FAILURE"

When the message delivery fails and there is a DLQ attached to the subscription, the message is sent to the DLQ and an additional entry is logged in CloudWatch. This new entry is specific to the delivery to the DLQ and refers to the DLQ ARN as the destination, as shown in the following JSON object.

  "notification": {
    "messageMD5Sum": "81c395cbd350da6bedfe3b24db9517b0",
    "messageId": "8959db9d-25c8-57a6-9439-8e5be8f71a1f",
    "topicArn": "arn:aws:sns:us-east-1:123456789012:Rental-Orders",
    "timestamp": "2019-10-04 05:16:52.876"
  "delivery": {
    "deliveryId": "a877c79f-a3ee-5105-9bbd-92596eae0232",
    "providerResponse": "{\"sqsRequestId\":\"8cef1af5-e86a-519e-ad36-4f33252aa5ec\",\"sqsMessageId\":\"2b742c5c-0750-4ec5-a717-b95897adda8e\"}",
    "dwellTimeMs": 51,
    "attempts": 1,
    "statusCode": 200
  "status": "SUCCESS"

By analyzing Amazon CloudWatch Logs entries, you can understand why an SNS message was moved to a DLQ, and then take the required set of steps to recover the message. When you enable delivery status logging in SNS, you can configure the sample rate in which deliveries are logged, from 0% to 100%.

Encrypting DLQs

When your SNS subscription targets an SQS encrypted queue, then you probably want your DLQ to be an SQS encrypted queue as well. This configuration provides consistency in the form that your messages are encrypted at rest.

To follow this security recommendation, give the CMK you used to encrypt your DLQ a key policy that grants the SNS service principal access to AWS KMS API actions. For example, see the following sample key policy:

    "Sid": "GrantSnsAccessToKms",
    "Effect": "Allow",
    "Principal": { "Service": "" },
    "Action": [ "kms:Decrypt", "kms:GenerateDataKey*" ],
    "Resource": "*"

If you have an SNS encrypted topic, but a subscription in this topic points to a DLQ that isn’t an SQS encrypted queue, then messages sidelined to the DLQ aren’t encrypted at rest.

For more information, see Enabling Server-Side Encryption (SSE) for an Amazon SNS Topic with an Amazon SQS Encrypted Queue Subscribed.


DLQs for SNS, SQS, and Lambda increase the resiliency and durability of your applications. These DLQs address different failure modes, and can be used together.

  • SNS DLQs store messages that failed to be delivered to subscribed endpoints.
  • SQS DLQs store messages that the consumer system failed to process.
  • Lambda DLQs store the messages that resulted in failed asynchronous executions of your functions.

Setting up DLQs for subscriptions, queues, and functions can be done using the AWS Management Console, SDK, CLI, API, or CloudFormation. DLQs are available in all AWS Regions. Start today by running the tutorials: